Calculation formula of solar street light configuration
1: First calculate the current:
Such as: 12V battery system; 2 lights of 30W, a total of 60 watts.
Current＝60W÷12V＝5A
2: Calculate the battery capacity requirement:
For example, the cumulative lighting time of street lamps needs to be 7 hours (h) at full load every night;
(For example, open at 8:00 pm, close 1 at 11:30 at night, open 2 at 4:30 in the morning, and close at 5:30 in the morning)
It needs to meet the lighting needs of 5 consecutive cloudy and rainy days. (5 days plus lighting the night before the rainy day, 6 days)
Battery=5A×7h×(5+1)day=5A×42h=210AH
In addition, in order to prevent the battery from being overcharged and overdischarged, the battery is generally charged to about 90%, and the remaining 20% is discharged. So the [FS:PAGE]210AH is also only about 70% of the real standard in the application.
Three: Calculate the peak demand (WP) of the battery panel:
The cumulative lighting time of street lamps needs to be 7 hours per night (h);
★: The average daily effective light time for solar panels is 4.5 hours (h); at least 20% of the reservation for solar panels is relaxed.
WP÷17.4V＝(5A×7h×120％)÷4.5h
WP÷17.4V＝9.33
WP=162 (W)
★: 4.5h daily sunshine time is the sunshine coefficient in the vicinity of the middle and lower reaches of the Yangtze River. The middle and upper reaches of the Yangtze River are generally 5 hours.
In addition, in the solar street light assembly, the line loss, the loss of the controller, and the power consumption of the ballast or constant current source are different, which may be about 5%-25% in practical applications. Therefore, 162W is only a theoretical value, and it needs to be increased according to the actual situation.
At present, LED light efficiency is higher than traditional lighting and display light sources, showing superior energy-saving effect, such as traffic signals, landscape lighting and other special lighting fields, the energy-saving effect reaches more than 80%; compared with traditional lamps, functional lighting , For example, LED road lighting can save more than 30% of electricity, tunnel lighting can save 40% of electricity, and LED indoor downlights, spotlights and other lighting products can replace traditional halogen lamps and fluorescent lamps to save energy by 30% to 50%. Since 2009, in " Driven by the "Ten Cities Ten Thousand Lights" pilot demonstration application project (hereinafter referred to as "Ten Cities Ten Thousand Lights"), the speed of domestic technological progress has accelerated significantly. At present, domestic power LED chips have been applied in some branch road lighting and indoor downlight and spotlight lighting. Through the integration of optical design, heat dissipation, drive and other technologies, the luminous efficacy of indoor and outdoor functional lighting has exceeded 80lm/W. According to preliminary statistics from 21 pilot cities, as of now, there have been more than 500,000 street lights, tunnel lights, and solar street lights. , fluorescent lamps, downlights, spotlights, stage lights and other products have been demonstrated and applied, saving more than 100 million kilowatt-hours of electricity annually. In addition, driven by the Olympic demonstration project, the Shanghai World Expo and the Guangzhou Asian Games will use LED landscape lighting in large quantities, and some roads and indoor lighting will also demonstrate the application of semiconductor lighting products.
According to estimates, the life cycle energy consumption (240 kWh) of LED lamps with a luminous efficacy of 75lm/W is far lower than that of incandescent lamps (1505 kWh) and is also lower than that of compact fluorescent lamps (327 kWh). low characteristic. At the same time, LEDs do not have the mercury-containing problems of fluorescent lamps, energy-saving lamps, and the cold cathode tubes (CCFLs) used in the backlight of existing LCD TVs and LCD monitors, which can greatly reduce the environmental pollution of waste lamps and lanterns. Infrared and ultraviolet radiation are truly green and healthy lighting sources.
