You certainly want your streets or sidewalks to have optimal lighting. Double arm solar street lights typically provide a wider lighting range, higher brightness, and more uniform light distribution, especially suitable for wide roads.
Single arm street light poles are more suitable for smaller spaces or narrow roads, where concentrated lighting is crucial. Each type of street light pole has its own advantages and disadvantages. Your choice depends on the area you need to illuminate and the lighting effect you want to achieve.
Key Takeaways:
Single arm street light poles provide concentrated lighting, ideal for narrow roads and pathways. Proper installation of street lights helps improve area safety by reducing dark areas.
Double-arm solar street lights offer a wider lighting range and higher brightness, making them ideal for use on busy roads and intersections. These poles help eliminate blind spots and make pedestrians more visible at night.
Before choosing a pole type, consider the actual needs of the area. Single arm poles are best suited for smaller areas. Double arm poles are better for larger areas with more traffic.
Plan the spacing and height of the poles carefully to ensure optimal stability. Proper placement ensures even light distribution, thus ensuring the safety of drivers and pedestrians.
Both types of poles require regular maintenance. Check for loose parts and damage every six months. This ensures the streets remain safe and brightly lit.
Lighting Coverage:
Single arm street light poles provide concentrated lighting, ideal for narrow roads and pathways. You'll notice the advantage when walking or driving at night. The light shines directly below and to the sides of the pole, helping you see the road clearly and travel safely.
Tip: Installing single arm street light poles in the right locations helps ensure safety and eliminates dark areas.
For better visibility, place the poles 1.5 to 3 meters from the edge of the road.
Choose an arm length between 1 and 3 meters. Use longer arm lengths for wider roads and shorter arm lengths for narrower streets.
Align the overhang with the centerline of the road to avoid shadows.
Set the tilt angle between 0° and 15° to direct the light to the desired location. Utility poles are placed every 30 to 50 meters along city streets to ensure even lighting.
Brightness and Uniformity
Single-arm street light poles provide high brightness and uniform light distribution, achieving optimal results when properly installed.
The light is evenly distributed across the road surface, without noticeable shadows or bright spots, helping drivers and pedestrians see more clearly. This design also reduces glare, making nighttime travel more comfortable.
Best Use Cases
Single-arm street light poles are best suited for situations requiring single-point lighting. You can find them in the following locations:
You can use single-arm street light poles on both sides of rivers, ramps, or wide roads to improve visibility.
They are also suitable for parks, residential areas, and sidewalks. Their design allows you to create appropriate lighting schemes for each location.
Lighting Coverage
Double-arm solar street lights provide wide and uniform lighting. You can use them on wide roads, highways, and busy intersections. Each pole has two arms, so both sides of the street are illuminated. This design helps cover a larger area with fewer poles.
Double-arm solar street lights typically illuminate an area with a diameter of 20 to 40 meters.
With a 7-meter pole, you can expect to cover a diameter of approximately 20 to 30 meters.
A 9-meter pole can extend to 40 meters or even higher.
For optimal coverage, most city streets use poles 8 to 10 meters high.
Highways usually require taller poles, up to 12 meters, to illuminate a wider area.
As you can see, this setup is ideal for areas with heavy traffic or wide lanes. You don't have to worry about dark areas between the lights.
Brightness and Uniformity
Double-arm solar street lights provide bright and stable light. A light fixture is installed on each of the two arms, resulting in more uniform lighting across the entire street. This design helps improve nighttime visibility for pedestrians.
Because the light is evenly distributed, drivers, cyclists, and pedestrians feel safer. There are no harsh shadows or glaring bright spots.
The double-arm design also allows you to use different types of bulbs, such as LED lights, sodium lamps, or xenon lamps. You can choose the most suitable bulb based on your needs. Tip: Double-arm solar street lights help prevent glare and maintain balanced lighting, making nighttime driving easier.
Best Use Cases
Double-arm solar street lights should be used in areas requiring strong and wide-angle illumination. This type of street light pole is best suited for:
Main roads and highways
Commercial and shopping districts
Large intersections
Parking lots and public squares
