1. Solar street lights are generally dusty. You can wipe them with a damp cloth when cleaning. Keep the same direction. Do not rub back and forth. The intensity should be moderate, especially for chandeliers and wall lights.
2. Clean the interior of the lighting. When cleaning the bulb, first turn off the light. When wiping, you can remove the bulb separately and wipe it. If you clean the lamp directly, do not turn the bulb clockwise to avoid the lamp cap being over-tightened and peeling off.
3. Because the solar street light’s battery panels accumulate dust for a long time, it will have a certain impact on the solar panel’s absorption of sunlight, and when the solar panel has a shading surface, it is easy to form a short circuit of a string of batteries, but in general, solar street lights are not Those that need cleaning, because the battery panels will be washed clean when it rains, if there is no rain for a long time, occasionally cleaning is still needed.
4. When there is wind, rain, rain, hail, snow, etc., measures should be taken to protect the solar cell array to avoid damage. Check whether the control room and battery are indoor water. After a storm, check whether the equipment is working properly, and its charge and discharge control Damage and so on. The lighting of the solar cell array should always be kept clean, wipe gently with clean gauze water, do not wash with hard objects or corrosive solvents, heuristics.
5. If the traffic volume on the road where the solar street lamp is located is relatively large, the maintenance personnel should always check the battery pack. Because if the traffic volume on the road is large, the dust in the gray air is also appropriate. It will cause a lot of dust to accumulate on the battery pack, so regular cleaning operations must be carried out, otherwise long-term accumulation of dust will cause the battery pack to fail to operate normally. And it also has a very large impact on the service life of the battery, which may directly lead to inability to operate.
