With the continuous improvement of the conversion efficiency of solar energy and batteries, the use of solar energy for power generation has become a reality, and has been put into use in all walks of life, especially in the field of lighting, solar street lights have begun to be used on a large scale in China. So what are the installation requirements for solar street lights?
1. The direction of solar panels should be true south.
2. The solar street lamp should be avoided as far as possible from the heat source, so as not to affect the service life of the lamp.
3. There should be no direct light source above the solar panel. In order to avoid misidentification of the lighting control system and lead to misoperation.
4. The civil construction of the pole foundation of the solar street light must have sufficient strength, and the embedded parts must be reliable and suitable for the lamp holder.
5. The array board should be installed in a place where there are no tall buildings, trees, telegraph poles, etc. that do not block the sun and wind. When it is not possible to be unobstructed throughout the day, ensure that there is no obstruction between 9:30-15:30 as much as possible.
6. The design of protective grounding and lightning protection facilities should strictly abide by the "Code for Design of Building Lightning Protection". All solar street light poles and electrical equipment should have reliable protective grounding and lightning protection facilities. After excavation of the foundation pit, 50mm x 5mm x 1500m galvanized angle steel should be driven into the corners of the foundation pit with low poles below 12m, and the grounding resistance should be less than 10Ω. When the geological conditions are difficult to reach, it can be solved by burying grounding bodies and using resistance reducing agents.
The above installation requirements for solar street lights are shared here for everyone. I want to remind everyone that you must choose a regular solar street light manufacturer to buy solar street lights. Do not choose small workshops because of cheapness, otherwise the quality cannot be guaranteed, and the follow-up will There are many things to deal with.
