1. The use of solar street lights will not produce any pollution. It must be environmentally friendly and energy-saving. The light source has no radiation or light pollution. It does not contain harmful metals. It is a green lighting product.
2. The brightness requirements in rural areas are not very high. Under normal circumstances, as long as it can illuminate the road, the time required to turn on the lights is not very long. Generally, the rural area is 6 o'clock in the evening to 12 o'clock; the lighting time is generally: 4 -6 hours.
3. After choosing the specifications, dimensions and parameters, and paying attention to the quality of solar street lights, solar street lights are composed of five main components, many manufacturers only produce one of them, and other components are assembled, so it is difficult to guarantee The quality of the product, even people cannot be found after the project has a problem.
4. Rural street lights and road lighting are convenient for travel. Meet the basic needs, save money and be practical, easy to install, and maintenance-free.
5. In terms of rural road lighting work, it is important to choose a suitable road lighting source. When choosing a rural street lighting source, street lamps can only be considered in terms of street lamp installation cost and service life to ensure good street lamp installation in rural areas.
6. In some rural areas, the roads are only a few kilometers away, and solar street lights are installed. Some are very close and some are far apart. Installing too close will cause waste of resources, and if the installation distance is too far, it will Cause lighting blind spots. Therefore, when installing solar street lights, you must choose the installation point scientifically and reasonably.
7. It can be carried out on a sunny day, so it is impossible to quickly charge the battery after installation. If charging and discharging are carried out at night, not only the excellent practical application effect will not be achieved, but the life of the solar lamp for the construction of the new countryside will be certain. harm.
8. Install some small wattage led street lamp heads, usually between 20W and 60W. There are no street lamp maintenance technicians in rural areas, and maintenance is still troublesome. For solar street lights, it does not need to be wired , The installation is relatively simple, and the LED light source is used, and the luminous effect is relatively good. For rural areas, the advantages of using solar street lights for the lighting system are more obvious.
9. Wiring. The new rural construction solar light system software belongs to the bottom pressure system software. After clarifying the positive and negative of the battery panel, light source, and battery, the wiring instructions on the control panel must be strictly implemented.
